NOTE
If the definitions for a specific AU/SU in the Software Upgrade Settings page contradict the relevant definitions in the Software Upgrade page, the definitions in the Software Upgrade page will be ignored.
The Settings section includes the following components:
Component |
Description |
NPU Files |
Read-only tables that display the current AU and SU SW Files available in the NPU. |
File |
Select the upgrade file(s) from the list of available files for one or several of the relevant device types: • NPU • AU • SU You can select either one of the relevant files available in the NPU, or From Disk. If From Disk was selected, click on the Browse icon to open the Open dialog box, enabling you to select a file from your PC. |
Operation |
The operation to be performed for each device type. The available options are: • None • Reset • Load to NPU (not applicable for NPU) - Loads the AU/SU SW file to the NPU. Note that if the NPU already holds 4 files of the relevant type, one of them must be deleted (see "Files in NPU/MBS" ). If the selected file already exists in the NPU, the operation will be skipped. • Load to Shadow - Loads the selected file to the Shadow memory of the applicable device(s). Applicable only if a file was selected for the relevant device type. If the file already exists in the device, no action will take place. For AU/SU, the file will be first loaded to the NPU (see above), and than loaded from the NPU to the AU/SU. • Run from Shadow - Perform the Load to Shadow operation (see above), reset it and reboot using the Shadow version. Note that for AU/SU, because the process is controlled by the NPU, the AU/SU will continue running from the Shadow version after reset. If the specified file already exists as the Shadow version (meaning that previously a Load to Shadow operation was executed for this SW File), the only operation to take place will be to reset and run from Shadow. If the specified file already exists as the Main version, no action will take place. • Set as Main - Perform the Load to Shadow and Run from Shadow operations (see above), then swap the files and sets the running file as the new Main file. |
|
NOTE |
If the definitions for a specific AU/SU in the Software Upgrade Settings page contradict the relevant definitions in the Software Upgrade page, the definitions in the Software Upgrade page will be ignored. |
|
To execute a Software Upgrade process: |
To execute a Software Upgrade process, select the devices to be upgraded (in the NPU & AU section and/or the SU section), define the software upgrade parameters as required (in the Settings section), and click Run. A Run dialog box will open, enabling you to save a log of the process, run the process without saving a log, or cancel the Run request. If you selected to save a log, a Save dialog box will open, enabling you to select the location and file name for the log. The default log file name includes the NPU's IP and the current Date and Time, with the extension ".log". After confirmation, the operation's Run log will be displayed. The Abort button enables you to cancel an operation before completion. Close the Run log window to resume normal operation of AlvariCRAFT.
|
To view a log of a previously executed process: |
Click on the Log button to open the Log window for the last executed process. To view a previous log, click on the Open button in the Log window and select the required log. Close the Log window to resume normal operation of AlvariCRAFT.
|
|
